CCTV service · Factories · Ludhiana
CCTV, DVR and NVR maintenance for factories in Ludhiana
A camera on the wall that is not recording is worse than no camera, because you only find out when you need the footage. If your factory CCTV, DVR or NVR needs looking after, tell us what you have and what is going wrong.
Existing cameras
Looking after the cameras you already have.
Factory CCTV is rarely installed once and left alone. Dust, heat, power cuts, loose cables and full hard disks quietly turn a working system into one that records nothing, or only half of the cameras. The usual signs are a camera showing a black screen, a recorder that beeps or restarts, footage missing for a day, or a clock that shows the wrong time.
This page is about the system already on your site: the cameras, the cabling and the DVR or NVR. It is a separate service from WCam cloud. We service any brand of camera and recorder, including Hikvision, CP Plus and Dahua. Tell us the brand, the number of cameras and what you see going wrong, and we will talk through what can be done.
Once the system is in good order, WCam can sit on top of it. It connects the same cameras to Wipra Cloud and tells you when a camera or recorder goes offline, so the next fault is found early.
How to start
Tell us what is wrong.
Three steps from a dead camera to a plan.
1. Call or write to us
Describe the fault and give us the brand of your cameras and recorder. Call us on +91 63901 63901.
2. We talk it through
Our team calls you back to discuss the problem and the next step for your site in Ludhiana.
3. Add WCam if you want early warning
WCam works with Hikvision, CP Plus, UNV (Uniview) and Dahua, and sends an alert when a camera or recorder goes offline.
Before you call
Four things worth noting down.
They make the first conversation short.
Brand and number of cameras
Which brand of cameras and recorder you have, and roughly how many cameras are on the site.
Which cameras show nothing
Note the cameras that show a black screen, and whether it started suddenly.
What the recorder does
Does it beep, restart on its own, or show a message about the hard disk?
What footage is missing
Note the day and time from which recordings are missing, if you can tell.
Who it is for
Who asks for this.
Sites where the cameras have been running for a while.
Factories with an older system
Cameras that went up years ago and have never been checked since.
Sites where only some cameras work
A gate camera that is fine and a yard camera that has been dark for weeks.
Owners who want to know it is recording
A clear answer on whether the footage will be there when it is needed.
Questions
Frequently asked questions
Is this the same as WCam?
No. Maintenance is about looking after the cameras and recorder on your site. WCam is the cloud service that connects them to Wipra Cloud, with AI and alerts.
Which brands can you look at?
Any brand. We service Hikvision, CP Plus, Dahua and other makes of camera, DVR and NVR. Tell us the brand and model of your cameras and recorder.
What does it cost?
The price depends on your site and on what is wrong, so it is not listed here. Call us and we will explain.
Who do I call if my cameras stop?
Call us on +91 63901 63901.
How will I know sooner next time?
With WCam, you get an alert when a camera or recorder goes offline, instead of finding out later.
Talk to us
Tell us what is wrong with your cameras.
Share the brand, the number of cameras and the fault, and our team will call you back.
Sales +91 63901 63901 · info@wipra.in
More from Wipra One